lumpy24uk

iTrader: (1)

well help needed again sorry to be pain but my dad always said u dont ask u dont get.anyways got a baileys dumpvalve for my classic its got a trumpet on side .no fitting kit .im putting this on my 95 classic wrx import is there any way i can put this on without fitting kit as loads of threads ive read u just need to remove old one but that was for diffrent scooby models cant find no fitting instructions or pics to help or where to locate where my original one is as its standard at the moment any pics or advise would be good cheers again in advance .

eggy

HI MATE, your dump valve is between intercooler and turbo,,its a plastic one probably (black/grey)has 2 pipes (1inch) block off the left one,even with a big bolt ,or something(cable tie it) your new one should fit into the other pipe, the small pipe on top of the new dump valve has to go to a T PIECE ,and goes to the small pipes on top of your inlet manifold

lumpy24uk

iTrader: (1)

hi mate thanks for repley took your advice and got it fitted today got it working so thanks for the advice mate