Newage red sti inlet manifold
#2
Scooby Regular
Join Date: Oct 2007
Location: A small small island...about 4th gear!
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
It will fit.
You will have a CEL light on the dash after fittment as the Sti has no TGvalves only a delete housing. I suppose you could fit your TGV's to the new manifold if you wished.....
Hope this helps
Colin
You will have a CEL light on the dash after fittment as the Sti has no TGvalves only a delete housing. I suppose you could fit your TGV's to the new manifold if you wished.....
Hope this helps
Colin
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: South West Scotland
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
Reason i was asking is im just about to fit a vf34,de cat up pipe,sti top mount & 550 injectors before going to Andy F for a remap!
Ive just bought a complete manifold with throttle bodies, injectors,oe dump valve & intercooler and was just wondering if the whole lot will just bolt on so to speak!
Ive just bought a complete manifold with throttle bodies, injectors,oe dump valve & intercooler and was just wondering if the whole lot will just bolt on so to speak!
#5
Scooby Regular
iTrader: (10)
Join Date: Jan 2008
Location: Nuneaton, Warwickshire
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Im the same as you Wulsey so hoping for further remarks in my quest for knowledge!
I have TD05 16G Turbo ready to go on so we can see what kinda figures we get when all work is complete..
I have TD05 16G Turbo ready to go on so we can see what kinda figures we get when all work is complete..
#6
Scooby Regular
Join Date: Oct 2007
Location: A small small island...about 4th gear!
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Did all the type Uk sti's have TGV's .There is not even connectors in the loom for them so i assume they we never there. Car was mapped first time early last year. Ecu had never been played with and if it had TGV's as standard then the CEL would have had to been mapped out.
I agree with it being a bit pointless at the power levels you will be running. I hear B&Q are doing some nice crinkle paint that is in the correct shade of go faster red
#7
Scooby Regular
iTrader: (2)
I have just carried out a full engine build and swapped a MY04 sti "Type UK" manifold onto the new engine and it had no TGV's ????. Car was totally original and i bought it standard with a very low mileage.
Did all the type Uk sti's have TGV's .There is not even connectors in the loom for them so i assume they we never there. Car was mapped first time early last year. Ecu had never been played with and if it had TGV's as standard then the CEL would have had to been mapped out.
I agree with it being a bit pointless at the power levels you will be running. I hear B&Q are doing some nice crinkle paint that is in the correct shade of go faster red
Did all the type Uk sti's have TGV's .There is not even connectors in the loom for them so i assume they we never there. Car was mapped first time early last year. Ecu had never been played with and if it had TGV's as standard then the CEL would have had to been mapped out.
I agree with it being a bit pointless at the power levels you will be running. I hear B&Q are doing some nice crinkle paint that is in the correct shade of go faster red
All have 2.5 litre STis had TGVs since 2003.
JDM and worldwide 2.0 litre STis didn't have them (2002-2004).
I'm not sure about the worldwide 2.0 2005 STis though?
Fitting the TGVless bodies to a WRX will cause multiple CEL codes so fit them with other mods and a remap.
Nick
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM