GEMS idle mapping
#1
Scooby Newbie
Thread Starter
Join Date: Aug 2004
Location: Franeker
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
GEMS idle mapping
Hello there,
I've got a Gems ecu in my '99 wrx and we can't get the idle mapping right.
It needs to be very rich to make it run right. When we decrease the fuel mapping it stalls. What else can we try to get this right ?
The rest of the mapping goes fine and it runs well (about 390hp on the engine at 1.4bar).
The car has the following mods;
- 2.5 closed deck engine
- Forged ROSS pistons
- Forged connecting rods
- Sti bearings
- HKS FMIC
- HKS SSQV
- HKS Garret Turbo (GT 2835)
- 740 cc injectors
- Extra cold spark plugs
- Invidia Downpipe
- Invidia Middenpipe
- Varex backbox
- Apexi AVC-R Boostcontroler
- Lambda-Link
- Knock-Link
and some more stuff
Thanks in advance
Derk
I've got a Gems ecu in my '99 wrx and we can't get the idle mapping right.
It needs to be very rich to make it run right. When we decrease the fuel mapping it stalls. What else can we try to get this right ?
The rest of the mapping goes fine and it runs well (about 390hp on the engine at 1.4bar).
The car has the following mods;
- 2.5 closed deck engine
- Forged ROSS pistons
- Forged connecting rods
- Sti bearings
- HKS FMIC
- HKS SSQV
- HKS Garret Turbo (GT 2835)
- 740 cc injectors
- Extra cold spark plugs
- Invidia Downpipe
- Invidia Middenpipe
- Varex backbox
- Apexi AVC-R Boostcontroler
- Lambda-Link
- Knock-Link
and some more stuff
Thanks in advance
Derk
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
supshon
General Technical
2
03 October 2015 08:06 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM