top feed injectors
#2
Scooby Regular
iTrader: (13)
Not sure if the New Age fuel rails will fit any of the Classics' 3 different phases of inlet manifold - I'm sure someone will be along soon to answer that question...
However, if the car is a v.5/6 MY98-00, then the answer is yes, as the top feeds can fit the Classic phase 2's OEM rails by way of an adapter kit. See here...
Carl Davey, specialist Subaru Impreza parts supply
However, if the car is a v.5/6 MY98-00, then the answer is yes, as the top feeds can fit the Classic phase 2's OEM rails by way of an adapter kit. See here...
Carl Davey, specialist Subaru Impreza parts supply
Last edited by joz8968; 01 December 2008 at 12:31 AM.
#3
no v 2 unfortunately, not too bothered about rails more about if the injector would fit manifold.unless someone has some 550cc they wanna sell cheap for my side feed rails?!
#4
Scooby Regular
iTrader: (13)
Yeah, that would be the no-hassle option!
See here for the max bhp capability for different injectors...
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Estimated Horse Power from Injectors
As can be noted, with the OEM FPR (at 3bar), the 550s are good for around the magic 400bhp mark - but that is at 100% IDC - with suitable turbo/FMIC and other supporting mods permitting.
See here for the max bhp capability for different injectors...
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Estimated Horse Power from Injectors
As can be noted, with the OEM FPR (at 3bar), the 550s are good for around the magic 400bhp mark - but that is at 100% IDC - with suitable turbo/FMIC and other supporting mods permitting.
Last edited by joz8968; 01 December 2008 at 07:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM