sigma alarm help pleeeeese
#1
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Mar 2008
Location: west mids
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
sigma alarm help pleeeeese
right were do i start i had some probs with my fuel pump wiring and got a so called electrical person to look at it. It turned out to be a corroded connection under the back seat but this was found after the idiot removed part of the sigma m30 that was tapped into the pump wiring (in drivers foot well) after loosing my rag and telling him to get lost i am now left with 3 black wires (i think 1 of them has broken of an earth point) and 2 that makes the tap into the pump wiring sadly they are all similar in length so which is which??? , for now i have joined the pump wires together but this means only 1 of the 2 immobilizers is working, 1 have removed some electical tape from the loom but they are black wires right back to the plug. i know its not good practice to give out security wiring info but could/does anyone have a pinout diagram they could pm me for the sigma m30 pleeeese
Last edited by sy.; 30 September 2008 at 06:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
toyney83
General Technical
10
02 October 2015 08:38 PM