yellow sti6

iTrader: (1)

As above going to get it fitted and mapped in the next month or so.

is there anything i need to change or do before i get it mapped

only mods are decat D/P and K&N air filter
(standard center pipe with blitz back box).


cheers all

dazdavies

iTrader: (22)

Nope, on the UK models you have to swap the cam and crank sensor wires over on the ECU loom but as yours is an STI you don't need to.

yellow sti6

iTrader: (1)

would i be wise to change the fuel pump to a walbro ??

and what could i expect at getting out of it ??(bhp/torque/fuel)

m_reed1

Hi,

When upping the power it is always a good idea to change your fuel pump to an uprated one, as the old one might be getting abit tired now.

Mark

yellow sti6

iTrader: (1)

cheers for that anything else that i could do now rather than paying a fortune at the mappers on the day.

yellow sti6

iTrader: (1)

BTTT ,anything else??

AndrewC

Check and if necessary regap or change your spark plugs.

dazdavies

iTrader: (22)

The last thing you want is mis fires when mapping eh Andrew?

AndrewC

Too right, messing about with hot plugs is no fun either!