wrx oil pump
#2
Scooby Regular
iTrader: (1)
Quite straight forward to change the oil pump - remove the front pulley,outer cam covers,timing belt and crank sprocket(normally corroded in place).
There are 7 M6 bolts holding the pump in place.
You will need a Pump to Block O Ring and a crank seal if not already fitted to the pump.
Mick
There are 7 M6 bolts holding the pump in place.
You will need a Pump to Block O Ring and a crank seal if not already fitted to the pump.
Mick
Thread
Thread Starter
Forum
Replies
Last Post
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM