Brembo bugeye conversion
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Jan 2006
Location: "In a distant land,far far away!"
Posts: 1,244
Likes: 0
Received 1 Like
on
1 Post
Brembo bugeye conversion
Ive got a bugeye wagon with a pcd of 5x100 but ive bought a full set of brembos with discs from an 05 sti which have the 5x114 pcd.
What i need to know,is what do i need to have drilled so that i can fit the brakes onto my car.
Do the calipers have to be drilled or is it the discs-or both.What are the pitfalls or is it straight forward and what companies do i approach,to do the work(im in the worcestershire/west mids areas).
Cheers
What i need to know,is what do i need to have drilled so that i can fit the brakes onto my car.
Do the calipers have to be drilled or is it the discs-or both.What are the pitfalls or is it straight forward and what companies do i approach,to do the work(im in the worcestershire/west mids areas).
Cheers
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Sell 'em and buy the right ones....
Somebody will have them.
HTH
DunxC
P.S. I mean the discs, as far as i know the callipers are a bolt-on mod.
Somebody will have them.
HTH
DunxC
P.S. I mean the discs, as far as i know the callipers are a bolt-on mod.
#3
am guessing here but would think theres a good chance thay will go straight on gotta be worth taking wheel off and haveing a proper look only 10mins to take caliper off and have a look if monting points are the same
#4
Scooby Regular
calipers are a direct fit (as long as your wheels clear them)..........as for the discs either have them re-drilled by an engineering company to the 5x100 PCD or sell those discs and put a set of earlier ones on
alyn
alyn
Thread
Thread Starter
Forum
Replies
Last Post