torque settings for block halves
19 July 2008, 02:07 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2008
Location: w-ton
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
torque settings for block halves
as above does anyone know?? as just torqued rods onto my new crank and i need to get it closed cmon lads n lasses im on my knees
19 July 2008, 05:35 PM
#2
Scooby Regular
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
yes they have to be torqued up and they have to be done in a sequence too, cant help other than that, i have the answer in one of my files but its too hard to explane, sorry, im sure someone can simplify it though.
19 July 2008, 05:48 PM
#3
M10 block bolts 47Nm
M8 block bolts 25Nm.
Use a smear of Grey 3 Bond on the dowty washers in the coolant gallerys.
Make sure the crank rotates freely when you are torquing the bolts up.
Check the torque of the M8 bolts after you have done the M10's up.
Mick
M8 block bolts 25Nm.
Use a smear of Grey 3 Bond on the dowty washers in the coolant gallerys.
Make sure the crank rotates freely when you are torquing the bolts up.
Check the torque of the M8 bolts after you have done the M10's up.
Mick
Thread
Thread Starter
Forum
Replies
Last Post