a game of 2 halves
#2
Scooby Regular
iTrader: (1)
M8 bolts are 25Nm
M10 bolts are 50Nm.
As you are torquing up - make sure the crank is free to rotate as you are doing the M10 block bolts up.
Light smear of Grey 3 Bond on the Dowty washers in the coolant jackets.
Recheck the M8 bolts for correct torque AFTER the M10 are at the right torque.
Mick
M10 bolts are 50Nm.
As you are torquing up - make sure the crank is free to rotate as you are doing the M10 block bolts up.
Light smear of Grey 3 Bond on the Dowty washers in the coolant jackets.
Recheck the M8 bolts for correct torque AFTER the M10 are at the right torque.
Mick
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM