any ideas???
#1
Scooby Regular
Thread Starter
Join Date: May 2008
Location: london
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
any ideas???
iv got a 1993 wrx,i know the turbos gone cause ive got oil in the intake and smoke on boost but would i get oil and smoke out of the dumpvalve?? its got a fmic but the dumpvalves on the inlet pipe?? plus its seems like on idle it sound like its sucking to much air in to the airfilter?? and the revs r up and down!!any help would be well appreciated! cheers
Last edited by rikwrx; 10 July 2008 at 07:07 PM.
#2
Scooby Regular
iTrader: (10)
Join Date: Jan 2008
Location: Bedfordshire
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Oil and smoke from the dump valve sounds like rings to me. The smoke is the gasses from the cylinder being pushed past the rings,into the crank case,which then vents it into your intake via the breathers,taking oil with it.
If you take off your oil filler cap,rev it and see if theres a lot of pressure there,and exhaust gasses.
I had this exact symptom,and it was rings.
Mit
If you take off your oil filler cap,rev it and see if theres a lot of pressure there,and exhaust gasses.
I had this exact symptom,and it was rings.
Mit
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM