removing ABS for track car
25 June 2008, 02:49 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: From Outback 2 classic wagon 2 newage wagon 2 Legy TT 2 classic 2 newage STi
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
removing ABS for track car
Have 55 plate WRX that i am turning into a track car, have fitted the Ksport 330's, want to remove the ABS .
Anyone done this?
cheers
Matt
Anyone done this?
cheers
Matt
26 June 2008, 02:47 PM
#4
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
I spoke to Paul about this last week and suggested removing the ABS and replumbing using a brake bias valve so you could tweek the brake bias for specific tracks/conditions.
Some good info here: 22B Bulletin Board: Removing ABS system
Andrew...
Some good info here: 22B Bulletin Board: Removing ABS system
Andrew...
26 June 2008, 04:30 PM
#5
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: From Outback 2 classic wagon 2 newage wagon 2 Legy TT 2 classic 2 newage STi
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Andy
Thanks for the link m8, will read up on it.
We made it all the way to Cadwell Thursday nite only to find he had lost the key!!! Noooooooooooo!
Anyway, gives us time to get the cage/seats and BRAKES sorted properly before the next one!!!!!.
Looking forward to meeting you at Anglesey in august.
cheers
Matt
Thanks for the link m8, will read up on it.
We made it all the way to Cadwell Thursday nite only to find he had lost the key!!! Noooooooooooo!
Anyway, gives us time to get the cage/seats and BRAKES sorted properly before the next one!!!!!.
Looking forward to meeting you at Anglesey in august.
cheers
Matt
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM