Apexi Power FC Water temp Correction values
#1
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Athens Greece
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Apexi Power FC Water temp Correction values
I just make some mistakes in my Power fc and i lost the values for the water temp correction fom a MY97 Impreza.
If anyones have them please let me know.
If anyones have them please let me know.
#4
What if the numbers are as following?
Got my Power Fc used and I never changed the numbers, as I thought they are correct.
Here are my numbers.
LOAD 1792 - 8704
+80C 1,000 - 1,000
+50C 1,047 - 1,094
+30C 1,094 - 1,109
+10C 1,297 - 1,141
-10C 1,391 - 1,188
-30C 1,594 - 1,297
All other variables are the same as on the pic you posted!
Got my Power Fc used and I never changed the numbers, as I thought they are correct.
Here are my numbers.
LOAD 1792 - 8704
+80C 1,000 - 1,000
+50C 1,047 - 1,094
+30C 1,094 - 1,109
+10C 1,297 - 1,141
-10C 1,391 - 1,188
-30C 1,594 - 1,297
All other variables are the same as on the pic you posted!
#5
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Athens Greece
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Scooby Regular
iTrader: (1)
Join Date: Aug 2006
Location: North West
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
im not exactly sure what you are asking?? if you are in doubt of your water temperature fuel compensation values then just return them to the original values as posted above by jgm.
The original correction values are a little on the Rich side, but i cant see what the problem is as you wouldnt drive your car hard until its upto temperature anyway (85 - 90 ish ) and the effective compensation is 1.00 then (ie no fuel change )
al
The original correction values are a little on the Rich side, but i cant see what the problem is as you wouldnt drive your car hard until its upto temperature anyway (85 - 90 ish ) and the effective compensation is 1.00 then (ie no fuel change )
al
#11
Scooby Regular
Join Date: Jun 2002
Location: Turkiye, Florida
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
I believe there is a hidden value on cold startup for idle. I'm running a bit rich at idle and changing the water temp correction values doesnt make sense. May be I should decrease the load values not tried that.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
apexi, correction, corrections, default, fc, lost, map, original, power, temp, temperature, values, water