crank seal question
#1
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
crank seal question
has any one got a pic of the fly wheel end of the crank, as i have got a massive leak somewhere behind the flywheel, and the only thing that i can think it is, is the crank seal, i am wondering if there is a groove that the seal fits in on the crank and i havent pushed it on far enough, if its not the seal what could it be, thanks for any help, phil.
#2
IIRC there is no groove on the crank that the seal sits on, only on the block halves. I think the seal sits fairly flush with the face that the flywheel bolts on.
Also, on the block halves there is a service hole and a plastic cover with 5 or 6 screws. Oil could leak from these too.
Also, on the block halves there is a service hole and a plastic cover with 5 or 6 screws. Oil could leak from these too.
#3
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
the engine is out but ive covered it up for the day as im of to work soon. the way the oil was pouring out it should be pretty easy to see the leak but i cant see anything yet, ill take another look tommorrow, thanks for your reply, all the best, phil.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM