phase 1 inlet into a phase 1.5 car with a 1.5 engine ..... :D
#1
phase 1 inlet into a phase 1.5 car with a 1 engine ..... :D
I have got a phase 1 inlet manifold that is reversed and i'm hoping to fit it to my phase 1 engine that used to have the phase 1.5 inlet manifold fitted (wit the coil pack)
The question is will a phase 1 inlet fit into a 98 WRX which previously had a phase 1.5 engine and maifold etc.
Will i have to change any wiring or connectors on the throttle body etc.
for instance - the phase 1 appears to have a different connector on the throttle body to the phase 1.5 ?????
Any help is greatly appreciated.
Thanks
Chris
The question is will a phase 1 inlet fit into a 98 WRX which previously had a phase 1.5 engine and maifold etc.
Will i have to change any wiring or connectors on the throttle body etc.
for instance - the phase 1 appears to have a different connector on the throttle body to the phase 1.5 ?????
Any help is greatly appreciated.
Thanks
Chris
Last edited by minty; 24 April 2008 at 10:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM