Car cuts out at 50 degress c?
11 April 2008, 05:08 PM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Aug 2007
Location: Northern Ireland. Part of the UK
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
Car cuts out at 50 degress c?
Had an O-ring go on my injector rail last week and now the car will start fine when cold but cut out at around 50 degrees showing on the commander!
I hve changed the following to try to fix this, crank sensor, cam sensor, coolant temp sensor, coil packs, spark plugs, maf, 02 sensor, and the problem is still there! OE ecu shows code 44 wastegate solinoid as i have an AVCR fitted. Car will only just run on OE ecu due to mods but no other codes coming up! Fuel pump primes after cut out, car cranks but wont fire up untill around 15 degrees!
All sensors changed have been checked on a standard car and know faults with them. Car is an MY94 STI Apexi FC, AVCR, Aeromotive FPR, 440,s Fmic, Walbro. Had plugs out and no excess fuel in cylinders!
WTF is wrong with my car, supposed to be driving back to UK next week for final remap!
I hve changed the following to try to fix this, crank sensor, cam sensor, coolant temp sensor, coil packs, spark plugs, maf, 02 sensor, and the problem is still there! OE ecu shows code 44 wastegate solinoid as i have an AVCR fitted. Car will only just run on OE ecu due to mods but no other codes coming up! Fuel pump primes after cut out, car cranks but wont fire up untill around 15 degrees!
All sensors changed have been checked on a standard car and know faults with them. Car is an MY94 STI Apexi FC, AVCR, Aeromotive FPR, 440,s Fmic, Walbro. Had plugs out and no excess fuel in cylinders!
WTF is wrong with my car, supposed to be driving back to UK next week for final remap!
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM