Been looking at front mounts and have found one but the core size is a bit of a concern

600mm by 300mm by 75mm

the width and thickness seem ok but the depth at 300mm seems too deep

Has anybody fitted one with similar sizes and does it fit within the front bumper ok , i dont want it to hang out the bottom


cheers


Tony

 

The manufacturer's name will give those who have a clue !

 

There is no name just a ebay special that looks quite good for the money, more concerned with the core size thats all

 

IMO it wont fit without sticking out at the bottom. Certainly not if you don't have e.g. an STI lip.

Perhaps go for a Hybrid intercooler as they have a core of less height, or possibly an autobahn one which is slightly smaller lower than 300mm.

I've only ever fitted one FMIC to a bug eye, but it's certainly a tight fit, IMO, even with the hybrid

 

mine measures exactly 306mm deep, from ebay and was supposed to be 300mm deep, but it fits no problem, you would be surprised the room you have. You do however need to cut the big bar that runs along the front of the car.



mine doesnt have a sti splitter either, and it doesnt say HKS either now, its all black.

 

Sorry to go off topic but what did you paint your intercooler with mate?

Dave

 

The Hybrid that we stock for that model has a core size of: 580mmx210mmx100mm

Hope it helps.


Bob

 

spray hammerite, did the job and doesnt make the car run any differntly. just dont run the car while you spray it.... and do it off the car.