What FPR (blobeye)?
04 February 2008, 01:47 PM
#1
What FPR (blobeye)?
What's the best "bang for the buck" FPR out there for a blob eye?
I assume I need some kind of gauge to set the fuel pressure as well, are these usually incorporated into the gauge or do I have to get a separate one?
I assume I need some kind of gauge to set the fuel pressure as well, are these usually incorporated into the gauge or do I have to get a separate one?
04 February 2008, 03:15 PM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
fuelab, aeromatic, sx..
you need a fitting kit to install an adaptor on the end of the fuel rail to replace the original fpr.. those kits usually come with a gauge. Will need mapping to take full advantage and check fuelling is safe etc..
Simon
you need a fitting kit to install an adaptor on the end of the fuel rail to replace the original fpr.. those kits usually come with a gauge. Will need mapping to take full advantage and check fuelling is safe etc..
Simon
Thread
Thread Starter
Forum
Replies
Last Post