Hi
need to fit larger injectors but cant remove old ones from fuel rail ,tried removing 2 small screws and bracket but injectors wont pull out, any ideas guys
ssubaru

 

Spinach

They can be complete gits to get out.

I had thought about making a puller tool to get them out.

Try wrapping some cord/wire onto the top and pulling on that.

Or some lub/oil and wiggle them about to get it by the o-rings (they are the thing holding them in)

Make sure u release the fuel pressure before removing the first injector though.


J.

 

Thanks for the tip will just go and try it will let you know if it works
ssubaru

 

Hi
just managed to remove injector by pulling and a small screwdriver
thanks ssubaru

 

Hi,

Just wondering on the removal of injectors! Is this a hard, long job to accomplish?

Regards

Johny.

 

Hi
no its not hard once you no its safe to pull on injector tried it with one but put it back in as i do not have enough time to do all till weekend
ssubaru

 

Hi
just fitted larger injectors and used hks fuel controller to set up ,**** me the torque is unbelievable and i dont get any pinking at high speed running 20psi of boost
ssubaru
ps job was easy took about 2 hours in total