Link mapping
#1
Is there anybody near nottingam that can re-map an ecu with link
It was fitted by Bob Rawle and it is spot on. But it needs a final tune and it seems quite a trip down there.
It was fitted by Bob Rawle and it is spot on. But it needs a final tune and it seems quite a trip down there.
#2
There's one weird fella in Derby....
Have a chat with Mike Tuckwood, he can probably point you in the right direction (if it's only small adjustments to be done, otherwise I'd recommend you to go to BRD).
/J
Have a chat with Mike Tuckwood, he can probably point you in the right direction (if it's only small adjustments to be done, otherwise I'd recommend you to go to BRD).
/J
#3
I would also suggest making the journey to see Bob. After all, if anybody else with no commercial interest starts playing with it and screws something up then you'd wish you had made the journey yourself.
There is a general depth of knowledge developing out there for Link tuning and we are currently "field testing" one of our own but like I say, i'd suggest sticking with Bob if he's mappped it originally?
Mike.
There is a general depth of knowledge developing out there for Link tuning and we are currently "field testing" one of our own but like I say, i'd suggest sticking with Bob if he's mappped it originally?
Mike.
#7
I installed a VF24 in my linked car last autumn (and adjusted the link accordingly by myself - and the car is still alive )...you need to put more fuel in, and adjust the wastegate settings....as the adjustments are quite large (abt 3-4% more fuel in certain areas on the map) I'd recommend you to get the car to Rawle.
/J
/J
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM