Notices
General Technical
Sponsored by:
Sponsored by: CARiD

vf35 on my99/00

Thread Tools
 
Search this Thread
 
Old Nov 18, 2007 | 07:56 PM
  #1  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default vf35 on my99/00

hello will a vf35 turbo fit directy on my99 turbo2000.
Reply
Old Nov 18, 2007 | 07:58 PM
  #2  
badgerface123's Avatar
badgerface123
Scooby Regular
 
Joined: Oct 2006
Posts: 534
Likes: 0
From: deepest darkest dorset ripping up the A30 in a red V5
Default

yep it will im doing the same thing in the very near future
Reply
Old Nov 18, 2007 | 08:10 PM
  #3  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default

will i need a 3 port boost solenoid too. if so what one do i get.
Reply
Old Nov 18, 2007 | 08:15 PM
  #4  
badgerface123's Avatar
badgerface123
Scooby Regular
 
Joined: Oct 2006
Posts: 534
Likes: 0
From: deepest darkest dorset ripping up the A30 in a red V5
Question

im not sure its 100% necessary but most people would highly recommend and ive just bought 1 second hand where u located and who u gettng the car remapped by?
Reply
Old Nov 18, 2007 | 08:21 PM
  #5  
badgerface123's Avatar
badgerface123
Scooby Regular
 
Joined: Oct 2006
Posts: 534
Likes: 0
From: deepest darkest dorset ripping up the A30 in a red V5
Exclamation

im getting a denso one from a scooby breakers but u can get new prodrive ones from ebay.com ie the states may be able to get from main stealers here too
Reply
Old Nov 18, 2007 | 08:23 PM
  #6  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default

im sudbury suffolk. paul at ZEN PERFORMANCE
Reply
Old Nov 18, 2007 | 08:27 PM
  #7  
mike799's Avatar
mike799
Scooby Regular
 
Joined: Apr 2007
Posts: 426
Likes: 0
From: cheltenham
Default

Originally Posted by ukscooby2000
hello will a vf35 turbo fit directy on my99 turbo2000.
will be a direct bolt on,just make sure it as the banjo's as they are a different size from the original td04,also you will require a remap
Reply
Old Nov 18, 2007 | 08:30 PM
  #8  
badgerface123's Avatar
badgerface123
Scooby Regular
 
Joined: Oct 2006
Posts: 534
Likes: 0
From: deepest darkest dorset ripping up the A30 in a red V5
Lightbulb

ive not had any dealings with ZEN but heard lots of good things on here about them

im sure they'll guide u though what ya need when u getting the turbo and remap done?? u having ecutek remap or something else? im going to use an apexi pfc so i got the option to put the car back to standard to sell in the future and been told its a little bit better in some ways
Reply
Old Nov 18, 2007 | 08:31 PM
  #9  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default

Originally Posted by mike799
will be a direct bolt on,just make sure it as the banjo's as they are a different size from the original td04,also you will require a remap
what the banjo's
Reply
Old Nov 18, 2007 | 08:35 PM
  #10  
mike799's Avatar
mike799
Scooby Regular
 
Joined: Apr 2007
Posts: 426
Likes: 0
From: cheltenham
Default

Originally Posted by ukscooby2000
what the banjo's
oil feed & water feed pipes into turbo,there are a different thread size.as ive been told.
Reply
Old Nov 18, 2007 | 08:36 PM
  #11  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default

Originally Posted by badgerface123
ive not had any dealings with ZEN but heard lots of good things on here about them

im sure they'll guide u though what ya need when u getting the turbo and remap done?? u having ecutek remap or something else? im going to use an apexi pfc so i got the option to put the car back to standard to sell in the future and been told its a little bit better in some ways
just a ecutek remap ZEN done my last remap done a good job.
Reply
Old Nov 18, 2007 | 08:37 PM
  #12  
ZEN Performance's Avatar
ZEN Performance
Former Sponsor
 
Joined: Jul 2005
Posts: 2,859
Likes: 0
From: Wellingborough, Northamptonshire
Default

vf35 will be a straight swap for a td04, you can optionally move to a 3 port boost solenoid, but I normally fit a suitable size of restrictor in the factory boost pipes and use the 2 port, just as the vf35 is setup on a UK newage STI.
Reply
Old Nov 18, 2007 | 09:05 PM
  #13  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default

Originally Posted by Zen Performance
vf35 will be a straight swap for a td04, you can optionally move to a 3 port boost solenoid, but I normally fit a suitable size of restrictor in the factory boost pipes and use the 2 port, just as the vf35 is setup on a UK newage STI.
thanks mate i think my td04 has had it make a funny ringing/screeching noies over 1bar so iv been thinking upgrade vf35.
Reply
Old Nov 18, 2007 | 10:24 PM
  #14  
Scoobyfirsttime's Avatar
Scoobyfirsttime
Scooby Regular
 
Joined: Sep 2006
Posts: 226
Likes: 0
From: Kempston
Default

Where can you buy a VF35 turbo from? I have looked but can't see? Everywhere seems to just sell the VF34.....

Darren
Reply
Old Nov 18, 2007 | 10:46 PM
  #15  
ukscooby2000's Avatar
ukscooby2000
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
Default

Originally Posted by Scoobyfirsttime
Where can you buy a VF35 turbo from? I have looked but can't see? Everywhere seems to just sell the VF34.....

Darren
a scooby breakers
Reply
Old Nov 19, 2007 | 05:34 PM
  #16  
mike799's Avatar
mike799
Scooby Regular
 
Joined: Apr 2007
Posts: 426
Likes: 0
From: cheltenham
Default

Originally Posted by Scoobyfirsttime
Where can you buy a VF35 turbo from? I have looked but can't see? Everywhere seems to just sell the VF34.....

Darren
take a look here. Find subaru impreza turbo vf35 on eBay within, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 24-Nov-07 16:56:17 GMT)

you could also put a ad in wanted,thats how i purchased mine recently
Reply
Old Nov 19, 2007 | 09:52 PM
  #17  
Floyd's Avatar
Floyd
Scooby Regular
25 Year Member
Liked
iTrader: (9)
 
Joined: Apr 2000
Posts: 5,471
Likes: 10
Default

All you need to know about fitting a VF35 is here:
https://www.scoobynet.com/projects-4...stage-iii.html
I can't offer a VF35 but I have a 3 port solenoid spare. The VF35 is more commen than the VF34 as they are standard on STi new age models and are often replaced.

I recommend Paul or Bob to remap your car.

F
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
slimwiltaz
General Technical
20
Oct 9, 2015 07:40 PM
charlesr
General Technical
9
Sep 28, 2015 09:16 AM
slimwiltaz
General Technical
4
Sep 25, 2015 10:22 PM




All times are GMT +1. The time now is 11:56 AM.