oil catch can???
23 October 2007, 11:29 PM
#3
Scooby Regular
iTrader: (1)
Join Date: Apr 2007
Location: Up-North Like!
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Depends on how many port you have on the catch can.
If it one in one out than the 15mm is probably the one.
If its two or three in one out then a 9mm will do no problem.
My Hyperflow OCC has two 9mm in and one 9mm out.
If it one in one out than the 15mm is probably the one.
If its two or three in one out then a 9mm will do no problem.
My Hyperflow OCC has two 9mm in and one 9mm out.
24 October 2007, 04:52 PM
#4
Scooby Regular
Neither size are right. All Subaru oil breather lines are 1/2" or 12-13mm.If in doubt go for the bigger and use wider hose, if you can actually get any of it that is.
Thread
Thread Starter
Forum
Replies
Last Post