Notices

just fitted gauges wanna know if these reading are right

Thread Tools
 
Search this Thread
 
Old 22 October 2007, 09:18 PM
  #1  
pinchers
Scooby Regular
Thread Starter
iTrader: (1)
 
pinchers's Avatar
 
Join Date: Aug 2007
Location: Glasgow
Posts: 265
Likes: 0
Received 0 Likes on 0 Posts
Default just fitted gauges wanna know if these reading are right

ive got a 05 wrx with ppp and using millers fully synthetic

Oil press- at cold 6 bar, at idle when up to temp 3 bar.
Oil temp around 80 deg c
boost max 1.3

is it right for the cars boost to back down to say 1 bar from 1.3 when in 4th /5th gear nearing the red line :-s

cheers
Old 22 October 2007, 11:30 PM
  #2  
silverscoobydan
Scooby Regular
 
silverscoobydan's Avatar
 
Join Date: Dec 2004
Posts: 331
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry no idea about the oil press/temp!!!

A standard wrx turbo runs at about 1 bar, it will overboost to about 1.3(ish) bar but that is lower down in the rev range. The turbo is prety much maxed out at red line, especially in 4th/5th.
Old 22 October 2007, 11:39 PM
  #3  
grahamo
Scooby Newbie
 
grahamo's Avatar
 
Join Date: Oct 2007
Location: Dublin,Ireland
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

oil temp sounds about right.My 04 spec c runs about 80to90 degrees and 1.4 bar boost.oil pressure is 8bar up in the high revs and i think 6bar when warm. not sure when cold ill check in the morning and let you know.im using sti genome guages,think they are the same as defi.
Old 23 October 2007, 09:20 AM
  #4  
jaytc2003
Scooby Regular
iTrader: (1)
 
jaytc2003's Avatar
 
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes on 0 Posts
Default

pressures seem good.

the boost will tail off as well when in 4th and 5th so nothing to be worried about there. This level could be increased with a remap thought
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
P1-Murph
Subaru Parts
5
02 October 2015 03:22 PM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM



Quick Reply: just fitted gauges wanna know if these reading are right



All times are GMT +1. The time now is 09:14 AM.