Dump Valve fitting
10 January 2002, 12:13 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2001
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Hi all,
Just wondering if anyone has pics of a Forge Dump valve fitted to a 99uk turbo. Im getting one and need a few pics in order to fit the valve. Its supposed to be an easy job, is it?.
Sean
Just wondering if anyone has pics of a Forge Dump valve fitted to a 99uk turbo. Im getting one and need a few pics in order to fit the valve. Its supposed to be an easy job, is it?.
Sean
10 January 2002, 09:01 PM
#2
Scooby Regular
Join Date: Dec 2000
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Yep its very easy, i havent got a pic but i will try to describe it the best i can.
Firstly, find your std dump valve (bolted onto right hand side of intercooler) remove the 2 hoses from it and undo the 2 bolts either side. There is a rubber gasket which you will probably need when you refit the new forge valve. Fitting the forge valve should be the reverse operation, bolt it on with gasket in place then attach vacuum hose and recirc if it is needed. Thats it.
Ian
Firstly, find your std dump valve (bolted onto right hand side of intercooler) remove the 2 hoses from it and undo the 2 bolts either side. There is a rubber gasket which you will probably need when you refit the new forge valve. Fitting the forge valve should be the reverse operation, bolt it on with gasket in place then attach vacuum hose and recirc if it is needed. Thats it.
Ian
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM