Next steps for MY06 Hawkeye PPP?
#1
Scooby Regular
Thread Starter
Next steps for MY06 Hawkeye PPP?
I would like to know what everybody thinks about the next steps for a PPP'd WRX Hawkeye. I run it on Shell V-power so I guess I am getting close to 270bhp and 310 lbft? I would like to get the fabled 300bhp and around 350 lbft. Can I achieve this with standard turbo? I guess I will need new injectors, fuel pump and a remap and I will upgrade the intercooler as well as a matter of course any recomendations for this? STI intercooler maybe? I wont be fitting a front mount only top mount.
#2
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Here's a related thread.
https://www.scoobynet.com/scoobynet-...power-run.html
Std injectors will be fine but your std turbo will max out around 280-290bhp
Andy
https://www.scoobynet.com/scoobynet-...power-run.html
Std injectors will be fine but your std turbo will max out around 280-290bhp
Andy
#3
Scooby Regular
Thread Starter
Cheers Andy. It looked very interesting. Am I right in thinking that if I am going to go for 300bhp I may as well go for 365bhp and 355lb ft? I was on nights so had a look at some other bits. Would I achieve this with an IHI vf34 turbocharger. Would I need new injectors, fuel pump, intake manifolds, exhaust? Could I buy and fit the bits gradually and then get the remap last? I am very new to Impreza tuning so sorry for probably very stupid questions. I looked at your website and get the idea that you are a busy man so do not want to trouble you too much. Just read the last replys on there as well, get a bit angry dont they? Thanks again J
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM