Notices
General Technical
Sponsored by:
Sponsored by: CARiD

classic ecu error codes

Thread Tools
 
Search this Thread
 
Old Sep 26, 2007 | 05:41 PM
  #1  
ukdirtyboy's Avatar
ukdirtyboy
Thread Starter
Scooby Newbie
 
Joined: Aug 2007
Posts: 29
Likes: 0
From: Mansfield Nottinghamshire
Default classic ecu error codes

Hi, I have a 93 1.8 GL impreza and I noticed increased fuel consumption. I checked the ECU for fault codes and it showed 2 codes
33 Vehicle Speed Sensor & 51 Neutral Position Switch


Anyone got any ideas
Thanks steve
Reply
Old Sep 26, 2007 | 06:08 PM
  #2  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

those error codes are unlikely to cause increased fuel use..

mostlikely the lambda / O2 sensor in the exhaust

Simon
Reply
Old Sep 26, 2007 | 06:59 PM
  #3  
ukdirtyboy's Avatar
ukdirtyboy
Thread Starter
Scooby Newbie
 
Joined: Aug 2007
Posts: 29
Likes: 0
From: Mansfield Nottinghamshire
Wink

its more likely that i have been driving the car and not the wife (heavy foot)
but whats this speed sensor & Neutral Position Switch all about and where would i find the sensors
thanks steve
Reply
Old Sep 26, 2007 | 07:07 PM
  #4  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

lol.. reset the ecu see JollyGreenMonster.co.uk
and check to see if they return.. I am assuming the CEL was not on and you just checked? they could be months old etc..

Simon
Reply
Old Sep 26, 2007 | 07:17 PM
  #5  
ukdirtyboy's Avatar
ukdirtyboy
Thread Starter
Scooby Newbie
 
Joined: Aug 2007
Posts: 29
Likes: 0
From: Mansfield Nottinghamshire
Default

Originally Posted by Jolly Green Monster
lol.. reset the ecu see JollyGreenMonster.co.uk
and check to see if they return.. I am assuming the CEL was not on and you just checked? they could be months old etc..

Simon
no jolly this is when resetting. after a reset i get error 33 & 51 cant clear them
i did a rest about 2 months back and it was clear so the fault is only withing the last few weeks
thanks steve
Reply
Old Sep 26, 2007 | 07:36 PM
  #6  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

oh I see.. sorry.

strange then.. obviously the speedo works..
Reply
Old Sep 26, 2007 | 07:51 PM
  #7  
ukdirtyboy's Avatar
ukdirtyboy
Thread Starter
Scooby Newbie
 
Joined: Aug 2007
Posts: 29
Likes: 0
From: Mansfield Nottinghamshire
Default

Originally Posted by Jolly Green Monster
oh I see.. sorry.

strange then.. obviously the speedo works..
dont know i dont use it!!! lol
no it works find

ill tell ya what am getting and see if you can help

when driving it sames to be quite slow on the pull with a bit of a stutter now and then but when you very go for it and reach about 3500 till 5000 it gos like a dream. its only a 1.8 GL so i know its no sport or turbo but i know someone with one of these and it drives like a dream compared to mine.
Things try ed so far

Replaced fuel pump
Replaced MAF
Replaced plugs
Cleaned MAF/redex in tank down throttle body cleaned etc
Replaced airfilter
thanks steve

Last edited by ukdirtyboy; Sep 26, 2007 at 08:07 PM. Reason: am a numpty and cant spell
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Darrell@Scoobyworx
Trader Announcements
26
Jan 30, 2024 01:27 PM
alex_00s
Drivetrain
2
Sep 26, 2015 06:07 PM
Nick_Cat
Computer & Technology Related
2
Sep 26, 2015 08:00 AM
M4RKG
Wanted
4
Sep 25, 2015 09:54 PM
S600HBY
Subaru Parts
0
Sep 25, 2015 09:46 AM




All times are GMT +1. The time now is 05:58 AM.