VF35 banjo bolt oil feed
#1
VF35 banjo bolt oil feed
Does anyone know for sure what the correct banjo bolt is for a VF35?
I've just bought a VF35, which is a sleeve bearing turbo, so was expecting to see a fairly big oil feed hole, but it's only about 1.5mm. I'm wondering if it's the correct bolt. I thought the small holes were for the roller bearing turbos only.
The best info I can find is in this thread:
22B Bulletin Board: The definitive Turbo oil banjo bolt/restrictor thread
Problem is the info is contradatictory. The 2nd picture in the thread shows the exact bolt I have, which according to the guy who posted it, is the same bolt Roger Clark sell for the VF35. Problem is, the next picture in the thread shows 2 bolts and the one on the left is said to be a banjo bolt from subaru for the VF35 and the hole is much much bigger.
Don't know what I need!!
Will either be okay?
I've just bought a VF35, which is a sleeve bearing turbo, so was expecting to see a fairly big oil feed hole, but it's only about 1.5mm. I'm wondering if it's the correct bolt. I thought the small holes were for the roller bearing turbos only.
The best info I can find is in this thread:
22B Bulletin Board: The definitive Turbo oil banjo bolt/restrictor thread
Problem is the info is contradatictory. The 2nd picture in the thread shows the exact bolt I have, which according to the guy who posted it, is the same bolt Roger Clark sell for the VF35. Problem is, the next picture in the thread shows 2 bolts and the one on the left is said to be a banjo bolt from subaru for the VF35 and the hole is much much bigger.
Don't know what I need!!
Will either be okay?
#3
I just need to make sure the one in the block is the larger diameter one. The one in the turbo is small (1.5mm I measured).
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM