fitting spark plugs?
#1
Scooby Regular
Thread Starter
Join Date: Jul 2007
Location: dundee
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
fitting spark plugs?
is it a case of move bits n pieces that are in the way,check the gap on spark plugs,unbolt old ones ,bolt in new ones ,?
is 0.7mm the right gap for a standard classic sti my00
is 0.7mm the right gap for a standard classic sti my00
#2
Remove the air box and you have access to 1 side
Remove the water bottle (you can balance this on the battery) and you have access to the other side.
Crack um undone and yes 0.7 should be fine, thats what mine were and i think anything up to 0.8 is fine.
Double check everything is tightened and attached up properly b4 putting everything nack.
Remove the water bottle (you can balance this on the battery) and you have access to the other side.
Crack um undone and yes 0.7 should be fine, thats what mine were and i think anything up to 0.8 is fine.
Double check everything is tightened and attached up properly b4 putting everything nack.
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM