Strut / strut brace
17 August 2007, 07:31 PM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: N.I
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
Strut / strut brace
Hi all,
Just finsihed fittin a sti carbon strut brace to my impreza. On the drives side i noticed one of the bolts has the top broken off. This was not a problem until i fitted the strut brace as the nut will only tighten onto a couple of threats (maybe half way on the nut). Will this cause any problems with only having 2 of the 3 nuts fully tightened.
So i take the brace back off or fit the brace with only 2 of the nuts?
Cheers
Drew
Just finsihed fittin a sti carbon strut brace to my impreza. On the drives side i noticed one of the bolts has the top broken off. This was not a problem until i fitted the strut brace as the nut will only tighten onto a couple of threats (maybe half way on the nut). Will this cause any problems with only having 2 of the 3 nuts fully tightened.
So i take the brace back off or fit the brace with only 2 of the nuts?
Cheers
Drew
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM