Crankshaft sensor
#1
Scooby Regular
Thread Starter
Join Date: Apr 2000
Location: south london
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Crankshaft sensor
I have an error code saying the crankshaft sensor is faulty but cannot get the sensor out.
I have disconnected it and undone the bolt and the sensor turns round but wont lift out.
Help
Andy.
I have disconnected it and undone the bolt and the sensor turns round but wont lift out.
Help
Andy.
#3
Scooby Regular
iTrader: (1)
It is probably corroded in place - if its badly corroded in,you might have to remove the 3 outer timing covers ( left,right and center ) to gain access to the bottom of the sensor to knock it upwards out of the Oil pump.
When the covers are off,its easy to check that nothing has dropped into the timing belt from the old sensor.
When the covers are off,its easy to check that nothing has dropped into the timing belt from the old sensor.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM