Information on the mv pickup required
19 July 2007, 09:16 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jun 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Information on the mv pickup required
Where do I start!
I am about to start a project converting an mv pickup to a 2.5 turbo. The plan is to use an impreza turbo front cross member and hubs and shafts and a type R dccd gearbox. All this is fairly straight forward the loom is made the dash modified to take legacy clocks (impreza one's dont fit very well ) and so on. I have met with a small problem with the rear end as the suspension setup is completely different and without a lot of fabrication it is going to be difficult. The brakes are currently drums and call me a coward but I would like rear discs. I am told that The GLF turbo ran rear discs and they are the same splines as the mv pickup. if anyone can confirm this I would be greatful. Hopefully we can then fit rear discs which can then be drilled for the 5 stud wheels.
Any help with information for this project would be gratefully received
I am about to start a project converting an mv pickup to a 2.5 turbo. The plan is to use an impreza turbo front cross member and hubs and shafts and a type R dccd gearbox. All this is fairly straight forward the loom is made the dash modified to take legacy clocks (impreza one's dont fit very well ) and so on. I have met with a small problem with the rear end as the suspension setup is completely different and without a lot of fabrication it is going to be difficult. The brakes are currently drums and call me a coward but I would like rear discs. I am told that The GLF turbo ran rear discs and they are the same splines as the mv pickup. if anyone can confirm this I would be greatful. Hopefully we can then fit rear discs which can then be drilled for the 5 stud wheels.
Any help with information for this project would be gratefully received
Thread
Thread Starter
Forum
Replies
Last Post
gazzawrx
Non Car Related Items For sale
13
17 October 2015 06:51 PM