Are all Classic 380 Injectors the Same?
14 July 2007, 09:19 AM
#4
Former Sponsor
iTrader: (20)
Join Date: Oct 2006
Location: 8.95 @ 168mph. Zero to 1KM 194.1mph
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
All of the Subaru Grey side feed injectors are 380cc.
I would certainly make sure that they are cleaned/tested before use, because they could be the best part of 15 years old now.
Are you sure it's the injectors that are leaking, and not the o rings ?
Mark.
I would certainly make sure that they are cleaned/tested before use, because they could be the best part of 15 years old now.
Are you sure it's the injectors that are leaking, and not the o rings ?
Mark.
14 July 2007, 01:15 PM
#5
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes
on
0 Posts
It is the o-rings that are leaking, 99% sure anyway. I thought that as I was removing the injectors I'd take this chance to get some second hand ones, have them refurbished, and exchange for the present set.
14 July 2007, 02:00 PM
#7
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
14 July 2007, 09:05 PM
#8
Scooby Regular
Join Date: Apr 2007
Location: East Sussex - www.polarperformance.co.uk
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Idle and cruise would be fine, but full load would be a little richer, but not far out.Good enough to get you around for a bit before the remap.
Wouldn't suggest it though with 550's.
Wouldn't suggest it though with 550's.
Thread
Thread Starter
Forum
Replies
Last Post
serpico
ScoobyNet General
20
01 April 2019 07:47 AM