gear lever wont spring to middle???
13 July 2007, 09:11 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2007
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
gear lever wont spring to middle???
hi on my95 wrx import the gear lever when pushed over to the left ( 1 / 2 ) stays there, if you pull it to the right ( 5 / R ) it spring back to the middle ( 3 / 4 ) any body know why this is like this 
the gear box is fine so are all the gears,
the gear box is fine so are all the gears,
13 July 2007, 09:16 PM
#2
Scooby Regular
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes
on
0 Posts
Probably the linkage. I changed the gearstick on mine when I had the same problem, the ball joint at the bottom had become very worn. Changed it for a shortened version. Its now 90% better than before.
13 July 2007, 09:18 PM
#3
Former Sponsor
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
There is a spring at the end of the gear linkage close to the box this may have popped of it helps centralizes the gear shift, if not the problem will be around that area if the shift has gone sloppy
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM