Ian

iTrader: (10)

hi, i have one for the oil pressure (goes at the front of engine where the standard oil pressure sensor is)

and for the oil temp sensor, are people putting them about cylender 3? if so, what are they using?

thanks
ian

durry300

Ian

Ive just fitted Defi's (turbo, oil temp/pressure) on my JDM sti 2004- I brought an adaptor for oil pressure- this replaces the standard oil pressure sensor on the car and allows both the standard and Defi pressure sensors to be be inserted. In hindsight, I could've saved myself £35 for this part as the Defi oil pressure sensor just replaces the standard sensor (this only warns you when oil pressure reaches 1 bar- Defi gauge will give you much better info than this!!!)

Oil temp- there's a blanking nut next to cylinder 3 (about 8 inches back from the alternator)- i removed intercooler and alternator to get to these parts. You'll need an oil temp adaptor for this one- M18*1.5 (M) to 1/8 NPT (F)- this can be purchased from Home Tel: 01234 268213 for £5.99 part no. LMA067. Hope this helps??

NB- remember to use ptfe tape on threads- don't want any leaks!!!!!

Are you mounting the gauges in a triple dash pod?? I can recommend it- looks quality!!!!!!!!!