Scooby Ecu (which one?)
Three scooby ecu chips on ebay, can anyone tell me the difference or the prefered.
My car is 96 with 4 branch manifold, td05, fuel pump, h&s downpipe, no cat, hks hipower exhaust, hks air filter, apexi induction pipe(fpr is on shopping list)
http://cgi.ebay.co.uk/ScoobyECU-Genu...QQcmdZViewItem
http://cgi.ebay.co.uk/Subaru-Impreza...QQcmdZViewItem
http://cgi.ebay.co.uk/SCOOBYECU-SUBA...QQcmdZViewItem
My car is 96 with 4 branch manifold, td05, fuel pump, h&s downpipe, no cat, hks hipower exhaust, hks air filter, apexi induction pipe(fpr is on shopping list)
http://cgi.ebay.co.uk/ScoobyECU-Genu...QQcmdZViewItem
http://cgi.ebay.co.uk/Subaru-Impreza...QQcmdZViewItem
http://cgi.ebay.co.uk/SCOOBYECU-SUBA...QQcmdZViewItem
Or check PolarPerformance or Jolly Green Monster - ECU Mapping (option 1 on the polarperformance website is the same as the 2nd ebay item you've listed)
Wayne, do it properly 
I'm not sure of the source of the 1st fleabay chip but the 2nd you list is from ESL who produce the boards to enable Live mapping of the early 94-96 phase1 ECU's
I can supply the ESL generic chips but with your mods would much prefer a tailored solution, this would also leave you with an ECU that can be remapped to cater for any future mods you may decide on.
Pop down at some point and you can sample my 94 UK car

I'm not sure of the source of the 1st fleabay chip but the 2nd you list is from ESL who produce the boards to enable Live mapping of the early 94-96 phase1 ECU's
I can supply the ESL generic chips but with your mods would much prefer a tailored solution, this would also leave you with an ECU that can be remapped to cater for any future mods you may decide on.
Pop down at some point and you can sample my 94 UK car
Item 1 is a Prodrive map with the boost raised and some timing pulled (or the item one of his customers sent me to check for him was
)
Item 2 is Andy from ESL
Item 3 is Immortal Performance who got the PCB design of the original ScoobyECU from David Wallis. There's rumours David is not happy about this...but there just rumours, so I'll leave it at that.
I do have one on Ebay...but i'm not going to Link to it as it's against S'Net Policy
...
And as 'myblackwrx' has link'd to, I can also do the live mapping using the new live ROM board.
)Item 2 is Andy from ESL
Item 3 is Immortal Performance who got the PCB design of the original ScoobyECU from David Wallis. There's rumours David is not happy about this...but there just rumours, so I'll leave it at that.
I do have one on Ebay...but i'm not going to Link to it as it's against S'Net Policy
...And as 'myblackwrx' has link'd to, I can also do the live mapping using the new live ROM board.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM



