sti 3/4 inlet manifold
#3
Scooby Regular
iTrader: (1)
You will have to swap the pins around on the TPS, plus it does not have an idle switch on the TPS so the standard ecu will just continue to stall.... after market ecus such as the Apexi or Link do not use this. There are some other things to consider too and it depends on why you are thinking of changing... if its to use a front entry turbo then it makes the swap easier as you don't need spacers etc to get the turbo inlet under the old manifold.
As for which is outright best, depends what you are after. Personally i'd use the version 3/4 for a little more low down torque tho (longer runners)....
Tony.
As for which is outright best, depends what you are after. Personally i'd use the version 3/4 for a little more low down torque tho (longer runners)....
Tony.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM