Turbo temps
#1
Scooby Regular
Thread Starter
Turbo temps
recently had my MY00 tdo4 remapped to tek 3, so putting out 282bhp/336 lbt
so will the turbo run "hotter"? on full boost etc. as wondering about one of these turbo blankets to cut down heatsoak to the topmount.
cheers
ray t
so will the turbo run "hotter"? on full boost etc. as wondering about one of these turbo blankets to cut down heatsoak to the topmount.
cheers
ray t
Last edited by Ray T; 24 March 2007 at 01:52 PM. Reason: figures edited
#2
Former Sponsor
iTrader: (48)
336ft lbs is a lot of torque froma 2 litre with a TDo4.
The turbo may run a little hotter as it is working harder but the important thing is to ensure AFR and EGT are correct.
A turbo heat blanket retains heat in the turbo so it can spool quicker and it will also help reduce under bonnet temperatures.
On full chat, EGTs are typically around 900 deg C.
The turbo may run a little hotter as it is working harder but the important thing is to ensure AFR and EGT are correct.
A turbo heat blanket retains heat in the turbo so it can spool quicker and it will also help reduce under bonnet temperatures.
On full chat, EGTs are typically around 900 deg C.
#3
Scooby Regular
Thread Starter
Harvey,
Bob rawle was very impressed with the results when he mapped this a few weeks ago, said it was holding boost a lot longer than most tdo4's he'd seen.
cheers ray t
Bob rawle was very impressed with the results when he mapped this a few weeks ago, said it was holding boost a lot longer than most tdo4's he'd seen.
cheers ray t
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM