j7 gkk

when i bought my sti4 the bloke wired the convertor in wrong sending a positive wire down a negative to the fuel guage and broke it so i took the convertor off and fixed the fuel guage, but i want to put the convertor back on but i dont know which wire to use for the speed input its the same as one of these

eBay.co.uk: SUBARU IMPREZA/LEGACY - SPEEDO CONVERTER/DELIMITER CHIP (item 290091377126 end time 17-Mar-07 07:27:05 GMT)

just wanting to which wire goes where, it tells you on some of the wires but just wanting to double check so i dont do what the numpty who i bought it from did

ticky

JDM V4 Harness: This is what the connector leads to on the gauge cluster
A1> BlU/WHT high beam indicator
A2> RED high beam indicator
A3> YEL door open, interior lights
A4> LTGRN ! symbol for parking brake
A5> RED/WHT CEL (now in red)
A6> BLK/WHT battery symbol/light
A7> BLK/BLU seat belt symbol/light
A8> GRN/WHT oil drip symbol/light
A9> BLU/RED open door warning/light
A10> WHT vehicle speed sensor 2
A11> GRN/BLK vehicle speed signal wire
A12> BLK vehicle speed sensor 2
A13> VIO illumination


B1> YEL/BLK clock
B2> GRN/WHT temp gauge
B3> BLK/RED temp gauge
B4> BLK ground
B5> -------
B6> BLK/GRN left turn indicator
B7> GRN/RED airbag symbol/light
B8> BLU/ORG open door warning indicator/light
B9> LTGRN/BLK right turn indicator
B10> GRN tach signal


C1> ORG/WHT illumination
C2> BRN/WHT fuel gauge
C3> RED/BLK low fuel warning light
C4> YEL/GRN hot "thing" warning light
C5> LTGRN/YEL ABS indicator/light
C6> BLU/YEL snow flake "HOLD" warning/indicator
C7> PNK ???
C8> WHT/BLK small lightbulb housing, with no transparent indicator
C9> YEL/RED I/C Spray indicator light
C10> BRN/RED small lightbulb housing, with no transparent indicator
C11> ------ small lightbulb housing, with no transparent indicator
C12> WHT/GRN temp gauge
C13> YEL/GRN clock

j7 gkk

cheers for that matey ill have the clocks out tomorrow and try and get them wired in