starting problem
Thread Starter
Scooby Newbie
Joined: Mar 2007
Posts: 14
Likes: 0
From: s****horpe
starting problem
hi all need help just got a 94 turbo 2000 ran perfect for 2 days now it starts most of the time but sometimes it just spins over ? leave it for 10 mns go back it will start , been told its a sensor prob but anyone got any pics showing were i look for them
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
if it won't start when hot.. stopping for fuel for example but fine 10minutes later then most likely the crank sensor.
It is between the pulleys below the alternator on the front of the engine.. just above the cambelt cover.. brown in colour.. couple of wires and a 10mm head bolt holding it on.. cleaning often solves the problem for a period of time but it is time to replace it. the cam position sesnor is below the oil filler and looks identical and may help you locate the crank position sensor.
Simon
It is between the pulleys below the alternator on the front of the engine.. just above the cambelt cover.. brown in colour.. couple of wires and a 10mm head bolt holding it on.. cleaning often solves the problem for a period of time but it is time to replace it. the cam position sesnor is below the oil filler and looks identical and may help you locate the crank position sensor.
Simon
Last edited by Jolly Green Monster; Mar 12, 2007 at 11:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post