evil666watson

Hello people i have just set up a flamer kit on my scooby, put my full 3.5" decat pipe back on from turbo back,but no flames at all the spark plug is sparking well enough can anyone give me any ideas this will be great cheers lads scott

Knighty99

iTrader: (1)

Are u reving the engine at the same time? Usually flames come out when the revs r dropping down or back off??

Mark Essex

try a fast blast in 4th then let off should flame then tho when i had mine fotted the first plug i used didnt do any flames then i changed it to a diff type of a mondeo i think lol and it flames nearly all the time

evil666watson

the plug i was sent was just a thin ****ty fiat plug, so i should try something a bit fatter?

evil666watson

i have tried reving it up to 5k revs and letting it drop back down still nowt

Budgie

iTrader: (4)

have you got a vta dump valve?

budgie

Knighty99

iTrader: (1)

Try and use a stronger plug?

evil666watson

yes i have a forge dump valve and what type of plug should i try

Budgie

iTrader: (4)

mondeo in mine

Knighty99

iTrader: (1)

Try a hotter plug find a plug from something with a turbo engine or anythin above a 2l engine size?

evil666watson

mondeo what or does it not matter?

Knighty99

iTrader: (1)

Yea mate try a mondeo 1? Or just go down halford and have a look in there books see what plugs they have?

evil666watson

cheers for the help lads much appreciated scott

Turbo_T

iTrader: (7)

mondeo zetec plug the long one its about twice the size as a normal plug so goes in that more or try a 4 tip plug there allso good as have 4 contacts and not just the 1 spark

evil666watson

what do you think would be best mondeo or the 4 tip? cheers scott
i will go to the local car supplies shop today and try it

Turbo_T

iTrader: (7)

depends on teh backbox mate i got a 5" pipe so needed the longer mondeo 1 but if its only a 2/3" The 4 tip might work better as u get 4 sparks im no expert but just my idea