I have a 94 WRX.. i just purchased an ESL daughterboard from andy. i dont know what injectors im running just now. Its an import 94 with 240ps.

My plans are FMIC, TD05 16G turbo, Apexi induction pipe, Decat kakimoto racing ststem exhaust, Stainless turbo uppipe, walbro fuel pump, and of course the daughter board. now i want to uprate the injectors cos im sure the injectors will be at their max duty...

can anyone shed any light as to where to go next???

 

Your injectors will most likely be 380cc's mate. 440's or 550's is probably a worthwhile upgrade.

 

so what exactly will the 380cc max out, power wise, with standard fuel pressure?

sorry to hi-jack

Gaz

 

thats what i was thinking reading up on previous threads... Thing is.. with the ESL chip... is this mapped for 440 injectors or the standard 380's. I did say to andy what mods i was running... but he advised against the fuel pressure reg but did say the walbro pump would be a good benefit.. Never mentioned injectors thou.

Craig

 

these chips are only mapped for 380cc injectors. but you can have them set know, if you put bigger injectors on there. the car runs like a pig

 

im interested in these esl chips, what kind of bhp is expected with the mods you have done and the chips?

cheers

 

You are running 380's at the moment

You do know that the MY94 WRX has a TD05-16g already? Unless its a Wagon

 

not all came with the td05, some did have smaller. well so i read anyways

i have a uk 95, but that one did