z4 install help !!
14 February 2007, 10:06 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
z4 install help !!
hi guys
installed a z4 ecu in my 93 import 240hp.
took it 4 a short drive boosted and drove as expected.
took the car out again this evening and opened up throttle
not madly..loss of power through the revs...?? its like it was holding back
all the time, wouldnt let me go any higher?? oh and i put a tenner of 97ron in.
please help !!as im going to sell the bloodly thing if this carrys on
what the hell is wrong with this bloodly car??
installed a z4 ecu in my 93 import 240hp.
took it 4 a short drive boosted and drove as expected.
took the car out again this evening and opened up throttle
not madly..loss of power through the revs...?? its like it was holding back
all the time, wouldnt let me go any higher?? oh and i put a tenner of 97ron in.
please help !!as im going to sell the bloodly thing if this carrys on
what the hell is wrong with this bloodly car??
14 February 2007, 11:39 PM
#2
Reset the ecu again by disconnecting the battery then go for a longer drive (30mins+)varying speeds through the gears (don't have to do illegal speeds) and see what happens.
Make sure you put in the fuel you will be using most of the time.
This happened to me when i first put mine in.
Make sure you put in the fuel you will be using most of the time.
This happened to me when i first put mine in.
Thread
Thread Starter
Forum
Replies
Last Post