Knocklink, fitment
Thread Starter
Scooby Regular
iTrader: (6)
Joined: Apr 2005
Posts: 33,828
Likes: 0
From: Stroke it baby!
Are these easily fitted, or do you need special equipment to sert them up properly?
Also what is the best price you can get them for at?
PSlewis
stay out
Also what is the best price you can get them for at?
PSlewis
stay out
They're pretty easy to fit mate. The sensor screws into a ready made hole in the block, the microphone plugs into it and the display box goes in the car with a live and earth IIRC.
I think Scoobyteknix at Fleetwood have a 2nd hand one for sale. Give them a call on 01253 871188 or 07788 128845.
I think Scoobyteknix at Fleetwood have a 2nd hand one for sale. Give them a call on 01253 871188 or 07788 128845.
see here:
https://www.scoobynet.com/general-te...-problems.html
Bolt the sensor on there, run the wires back through the firewall and into the cabin, then wire the KL unit to the earth and ignition (I used the radio ACC wire). Easy job, maybe 1 hours work + a bit more time for putting it somewhere special like here:
https://www.scoobynet.com/scoobynet-...ide-scoob.html
https://www.scoobynet.com/general-te...-problems.html
Bolt the sensor on there, run the wires back through the firewall and into the cabin, then wire the KL unit to the earth and ignition (I used the radio ACC wire). Easy job, maybe 1 hours work + a bit more time for putting it somewhere special like here:
https://www.scoobynet.com/scoobynet-...ide-scoob.html
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
crazyspeedfreakz
Wanted
17
Oct 5, 2015 07:19 PM



