cookstar

iTrader: (6)

I have a set of new pink injectors to go in my 02wrx, now seeing as i dont even know the location of the origional ones at the mo, i sthis a job i should even be thinking about?

Anyone changed theirs?

Also how much time should i allow myself for this if i did take the job on

scoobboy

iTrader: (3)

I would give them to someone who has fitted matej ust in case

I changed my 380cc injectors on my last classic to 550cc ones, only takes an hour or so, but one started leaking so had to replace seals.

Always put in with new seals on them. You have to take off a connector on top of the injector, pull the old ones out and push the new ones in, i used a tiny bit of grease to ease fitment.

You will have to push them a bit hard if dont go in and you will fell it when they are seated

cookstar

iTrader: (6)

They came with 4 new seals as they are brand new.

Where about should i be looking under the bonnet, and does anything else have to come out to aid removal

WRX_Rich

iTrader: (5)

its not to hard, im sure theres a step by step guide on ScoobyMods.com

just make sure you lub up both o rings on the injectors or you wont be the fist person to split the rings and end up redoing