are these injectors a stright fit on my car?
07 January 2007, 04:15 PM
#2
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
the injectors from an sti7 are top feed, yours are side feed....
are you saying tat the sti7 ones are denso phase 2? or yours are? either way, unless the inlet manifold and fuel rails have been swapped they almost certainly wont fit.
are you saying tat the sti7 ones are denso phase 2? or yours are? either way, unless the inlet manifold and fuel rails have been swapped they almost certainly wont fit.
07 January 2007, 11:31 PM
#4
Scooby Regular
Join Date: Nov 1999
Location: Nottingham with 620BHP & 530lb/ft @1.5bar boost on road fuel.
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
The injectors shown in your post above are NOT OEM items from an STi7.
See below, these are OEM STi (7 onwards) injectors (Euro & JDM).
The ones in your pictures above "appear" to be Phase 2 injectors, so should fit, that colour injector "could" be a 550cc size, (but could also be 740 or a couple of others as well).
See below, these are OEM STi (7 onwards) injectors (Euro & JDM).
The ones in your pictures above "appear" to be Phase 2 injectors, so should fit, that colour injector "could" be a 550cc size, (but could also be 740 or a couple of others as well).
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM