FB Tuning

iTrader: (30)

I have just bought a 300zx maf complete with wiring plug, to fit to my MY00 UK turbo.

Can anybody tell me which way round to connect the wires on the plug to the existing wires in the loom ?

Thanks

kbru247

notes show:

300 ZX MAF connector has 6 pins A-F:
A - Not Used
B - MAF Output Signal
C - Gnd
D - Gnd
E - +12V
F - Not Used

Subaru 92-96 MAF Connector has 5 pins:
1 - +12V
2 - Gnd
3 - Sensor Gnd
4 - MAF Signal
5 - Not Used

FB Tuning

iTrader: (30)

I would like to know how to wire it into the MY00 loom though.

SoNiCa

You re very close

97-98 MAF
Yellow/Green = +12Vdc
Black/green = Minus/Ground
Pink = 0-5V Signal

jim litten

I hope once you've done this that you're getting the car remapped as you'll need to rescale the MAF.

FB Tuning

iTrader: (30)

Yes, i will be adjusting the airflow curve to suit the new MAF

...Still need to know what the wiring is on the MY00 loom

AndrewC

MY99 MAF, 5 pin.

2 = +12v (Yellow)
3 = Gnd
4 = Gnd
5 = Signal (Green)

FB Tuning

iTrader: (30)

Thanks for the info Andrew.

I presume it makes no difference which way round you connect the 2 ground wires?

AndrewC

Doesn't seem to.

I'm surprise you didn't go for one of the 90mm Nissan MAFs to make fitting easier?

FB Tuning

iTrader: (30)

I've been on the lookout for a Q45 Maf for ages, but can't seem to find one

AndrewC

YHPM.