scoobyboard ecu
scoobyboard ecu
04 December 2006, 11:24 AM
#2
I never understand it when people say the ScoobyECU boards arn't mappable. Their as mappable as an ECUTEK ECU just that an ECUTEK is done by connecting direct to the car, whereas a ScoobyECU needs the chip removing from it's socket and re-blowing.
Both methods do a complete reflash/reprogram of the chip contents each time, rather then a live parameter by parameter change as per Apexi PFC.
The ECUTEK software does give you more diagnostics feedback, but a wideband and a set of detcans do just as good a job and rely more on the mappers abilities/knowledge rather then the software interperting what the ECU is seeing. To a degree the ECUTEK software does the mapping itself, in that it tells you what needs changing wrt to ignition timing etc....
Both methods do a complete reflash/reprogram of the chip contents each time, rather then a live parameter by parameter change as per Apexi PFC.
The ECUTEK software does give you more diagnostics feedback, but a wideband and a set of detcans do just as good a job and rely more on the mappers abilities/knowledge rather then the software interperting what the ECU is seeing. To a degree the ECUTEK software does the mapping itself, in that it tells you what needs changing wrt to ignition timing etc....
Last edited by Scott.T; 04 December 2006 at 11:49 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM