SAFCII - Will it work without an engine ?????
#1
SAFCII - Will it work without an engine ?????
I spent today wiring my Apexi SAFCII into my ECU and made double sure and triple sure that i connected it all the wires correctly.
I also soldered the wires as the poxy connectors that they want you to use to ensure a good connection were very poor.
Anyway when i had connected it all together, taped it up up and re-connected the battery nothing happened.
It doesnt even light up.......should it at least light up with the ignition on if there is a fault elsewhere ???
Now i have two problems at the moment.......
1. I dont currently have an engine under the bonnet.
2. My 2nd hand APEXi ECU i have not seen working.
or maybe even
3. The SAFC II (new) is faulty.
My question is ....would the ecu and SAFC work without an engine in place ?
Would a faulty ecu prevent the safc from functioning?
Any help is greatly appreciated.
thanks
Chris.
I also soldered the wires as the poxy connectors that they want you to use to ensure a good connection were very poor.
Anyway when i had connected it all together, taped it up up and re-connected the battery nothing happened.
It doesnt even light up.......should it at least light up with the ignition on if there is a fault elsewhere ???
Now i have two problems at the moment.......
1. I dont currently have an engine under the bonnet.
2. My 2nd hand APEXi ECU i have not seen working.
or maybe even
3. The SAFC II (new) is faulty.
My question is ....would the ecu and SAFC work without an engine in place ?
Would a faulty ecu prevent the safc from functioning?
Any help is greatly appreciated.
thanks
Chris.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM