Just been searching the ScoobyNet to find how to fit a boost gauge (mechanical) to my car. Found loads of stuff for MY97 on but none for the pre-facelift engine. My brother-in-law has fitted one to his Catalunya and it looks a piece of p!$s 'cos of the blanked pipe on the inlet manifold. However i can't find one on my engine (maybe im blind?).

Anyone got any advice on where to connect the gauge pipe to, pictures would be great too.

Cheers,

Tony.

 

Tony,

Just upped a new page on my site http://www.scoobymods.co.uk 4 u
The pix r from a 93 WRX. The direct link is
http://www.scoobymods.co.uk/boostg01.htm
See how u get on with that. Odd that... I jus took them pix yday
and for what seemed no reason

L8r m8
Pete

 

Cheers Pete, thats just what i needed.

Tony

 

No prob Tony,

Glad 2 have helped. The sites still in its infancy jnow as u can tell (havent wasted any time with anything that wasnt of use) Doing regular updates jnow, so nip back every now n then if u r doing "upgrades" Trying to catch up with all the features i should have done months ago but was 2 busy "using" the car

L8r m9
Pete

[Edited by teknopete - 11/27/2001 5:04:36 PM]

 

Pete,

Where did you get the gauges from? Did you make those yourself?

 

Nimbus,

I got the gauges from various sources as nobody had all the ones i wanted

Most of the gauges i got from:
Mike @ scoobymania 0115 913 3199 & Grant @ AWD 01738 63336
If u contact either of them tell them it`s the ones i bought that u r after, they`ll c u alright.

The pods I designed and made myself
I`ve also done a pillar pod but thats not shown on the site yet.

Hope this helps.

L8r
Pete

 

Pete, the pic isnt working on the link, which pipe is it you connect the gauge on?? (there are 3)

Cheers.

 

Gimme a sec m8 till i check the link

Pete

 

Crypt,

Jus checked the link m8 an it`s commin up ok here
The meter is connected to the T-piece which is connected to the middle port on mine

Hope this helps.

Pete

 

Cheers mate figured it out, fairly straight forward.

Cheers again.