ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Fitting Boost gauge to MY93 WRX? (https://www.scoobynet.com/general-technical-10/55994-fitting-boost-gauge-to-my93-wrx.html)

Tone Loc 25 November 2001 04:09 PM

Just been searching the ScoobyNet to find how to fit a boost gauge (mechanical) to my car. Found loads of stuff for MY97 on but none for the pre-facelift engine. My brother-in-law has fitted one to his Catalunya and it looks a piece of p!$s 'cos of the blanked pipe on the inlet manifold. However i can't find one on my engine (maybe im blind?).

Anyone got any advice on where to connect the gauge pipe to, pictures would be great too.

Cheers,

Tony.

teknopete 25 November 2001 10:19 PM

Tony,

Just upped a new page on my site http://www.scoobymods.co.uk 4 u ;)
The pix r from a 93 WRX. The direct link is
http://www.scoobymods.co.uk/boostg01.htm
See how u get on with that. Odd that... I jus took them pix yday
and for what seemed no reason :)

L8r m8
Pete

Tone Loc 27 November 2001 11:54 AM

Cheers Pete, thats just what i needed.

Tony

teknopete 27 November 2001 05:02 PM

No prob Tony,

Glad 2 have helped. The sites still in its infancy jnow as u can tell (havent wasted any time with anything that wasnt of use) Doing regular updates jnow, so nip back every now n then if u r doing "upgrades" :D Trying to catch up with all the features i should have done months ago but was 2 busy "using" the car ;)

L8r m9
Pete

[Edited by teknopete - 11/27/2001 5:04:36 PM]

Nimbus 28 November 2001 10:42 AM

Pete,

Where did you get the gauges from? Did you make those yourself?

teknopete 28 November 2001 09:22 PM

Nimbus,

I got the gauges from various sources as nobody had all the ones i wanted :(

Most of the gauges i got from:
Mike @ scoobymania 0115 913 3199 & Grant @ AWD 01738 63336
If u contact either of them tell them it`s the ones i bought that u r after, they`ll c u alright.

The pods I designed and made myself ;)
I`ve also done a pillar pod but thats not shown on the site yet.

Hope this helps.

L8r
Pete

cryptwalk 03 December 2001 09:04 PM

Pete, the pic isnt working on the link, which pipe is it you connect the gauge on?? (there are 3)

Cheers.;)

teknopete 03 December 2001 09:32 PM

Gimme a sec m8 till i check the link ;)

Pete

teknopete 03 December 2001 09:36 PM

Crypt,

Jus checked the link m8 an it`s commin up ok here :confused:
The meter is connected to the T-piece which is connected to the middle port on mine ;)

Hope this helps.

Pete

cryptwalk 03 December 2001 10:37 PM

Cheers mate figured it out, fairly straight forward.:D

Cheers again.:)


All times are GMT +1. The time now is 03:44 AM.


© 2024 MH Sub I, LLC dba Internet Brands